8 Key Points for the Screen Printing Machine Users

Commercial or non-commercial screen printing machine users should know some special requirements to print high-quality images in screen printing artwork. Printing technology has reached the peak of the world’s printing. Let’s look at the things you must know.

8 Key Points for the Screen Printing Machine Users

Printing SCREEN 

 In the screen printing process, the thing that you need first is a screen or mesh, and it is the most vital element. Screens may be of different types, colors, and resolutions. Whatever you print in your screen printing machine, like caps, sweats, shirts, signs, etc., you must print a high-quality image and a good-quality product. You must select particular screen products, whether wooden, plastic, metal, or aluminum. The Image might be close, and one side must be the thin bar for t-shirt or cap printing.

In addition, take out the registration from the mesh while printing a minimum amount. Next, you have to drive the ink into the fabric properly. When seeing the color, you need to see it a second time before printing. It isn’t easy to apply to the tight screen. The low-tension screen is suitable for using ink. While printing is running, you have to clean the mesh periodically. The tension of one side will be lower and thinner than the other area of the screen at the low tension button area of the Image. A lot of ink will gather at the low-tension button area of the Image. You can follow some high-tension screen tips to create a high-quality Image.

 Screen Printing Tension

To print a cap on a screen printing machine. Tension is more critical than t-shirt screen printing. It is because of the foam front caps, which are quite different from a t-shirt and other items. The screens should be glued and stretched correctly for any screen printing size. You can use an aluminum or retention frame to tighten the mesh without removing the mesh.

You have to use a thin steel bar if the frame isn’t retention, and it would be better than wood or aluminum. When you start to attach the mesh, you can increase the tension towards the center. Sometimes oil may be in the steel. How do you remove the oil? You’d better use a material like alcohol or spirit to clean or freshen the steel. Use the ink properly on the surface of your artwork. The Squeegee and the screen need sharpness like the blade of scissors.

SQUEEGEE 

The Squeegee for the cap is a little bit different from the t-shirt squeegee. The Squeegee blades should be 4 inches long for a cap screen printing press. Blade selection for cap screen printing is a crucial process. 75-95-75 durometer blade is quite suitable for t-shirt screen printing. It would help if you had the changing option for the blade; it does not matter whether the blade is of aluminum or wood. If the blade of the cap

If the blade of the cap screen printing machine is straight, the Squeegee should also be straight. The blades need to be sharp to cut the edge of the cap. If it is not sharp, the border would not be round. After finishing printing, you need to clear the ink instantly. The blade will be stiff if the ink remains in the blade. After washing the blade with the chemical or water, you need to store the Squeegee without resetting the blade.

Screen LEVEL for Screen Printing Machine

The textile screen printing press consists of the platens and the screen. If any movement happens between these two, the press creates the disqualified Image. Screen printers should check the platen for stationary materials. They should make sure all the plates are the same, and they need to tape the plates with paper. It would be better to add a flash dryer with the press, and it should be at a uniform off-contact distance. You should check the level of the screen of your press with a piece of glass (larger than the platen). Set up the glass against the screen; it should be flat to put the screen on the press. When the color arm comes or rests on the off-contact, the mesh needs to be flush, and it must be against the glass.

It would be better to add a flash dryer with the press, and it should be at a uniform off-contact distance. Check the level of the screen of your press with a piece of glass (larger than the platen). Put the screen on the press, set up the glass against the screen, and it should be flat. When the color arm comes or rests on the off-contact, the mesh needs to be flush, and it must be against the glass.

FLEXING

The platen needs to push down, and the platen needs to be very strong, like concrete. If it is not strong enough, a color registration problem may occur. It would help if you made the channel clamp move a little bit, which holds the screen laterally.

ROTATION

Sometimes printing press requires a bearing for multicolor screen printing equipment. A printer must load the bearing to run the multicolor press properly. Give pressure to the Bearings if the screen doesn’t rotate freely. A dangerous thing happens when you use spray adhesive lint. Use Lubricants like WD-40 for cleaning the bearing.

SPRINGS AND SEALS

For visual purposes, springs are essential. The coil was all touched and added with the spring. Remember, coil touching is vital. The spring will be too large if it doesn’t touch the coil. Then you have no other way to replace the spring. Heat tolerance is another critical factor for the spring manufacturer. The spring can be brittle if not properly heat-treated, which can pose a danger. To expose, some

The spring can be brittle if they are not properly heat-treated, which can pose a danger. To expose, some screen printing press users like to use air cylinders. Use the seals in that place where the rod enters. The air cylinders will not support the weight of the color arm or the screen, and the extra time seal wears. If somehow the seal gets worn, you must instantly replace the air cylinder of your screen printing machine. 

PLATEN SIZE

For the cap screen printing, the platen size is a big problem. With the different types of t-shirt printing, you don’t need to use a full-size and an adult platen. For many years, different types and sizes of designs were from foam fronts were used against the head. The platen will be perfect if you use flexible fonts on your screen printing press. After that, you have to take a pad like a mouse pad, which will raise the screen high and be a similar distance from off surface.

1. Perfect Air Compressor for Screen Printing press.

2. The Best Manual Screen Printing Machine

3.3D screen printing machine

4. Six Beginners Guide to Using a Screen Printing Machine at Home